CAN-2017D

DeviceNet is one kind of the network protocols based on the CAN bus and mainly used for the embedded network of the machine control, such as industrial machine control , aircraft engines monitoring, factory automation, medical equipments control, remote data acquisition, environmental monitoring, and packaging machines control, etc. The CAN-2017D follows DeviceNet specification Volume I/II, Release 2.0. User can access the analog input status and set the configuration via DeviceNet EDS file. CAN-2017D has 8-channel analog input and it can be used to various applications. By the DeviceNet masters of ICP DAS, you can quickly build a DeviceNet network to approach your requirements. For more information about the DeviceNet master interfaces and other DeviceNet products, please refer to the following web site.

Product specification
DeviceNet Interface
DeviceNet Specification	Volume I, Release 2.0 and Volume II, Release 2.0, Errata 5
DeviceNet subscribe	Group 2 Only Server
Connection supported	1 connection for Explicit Messaging 1 connection for Polled I/O 1 connection for Bit-Strobe I/O
Node ID	0~63 selected by rotary switch
Baud Rate (bps)	125 kbps, 250 kbps, 500 kbps
Terminator Resistor	Switch for 120 terminator resistor
Connector	5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file	Yes
Analog Input
Channels	8
Input Type	10V, 5V, 1V, 500mV, 150mV, 20mA,( External 125 Ohm Resistor Required)
Resolution	16-bit
Sampling Rate	10 Samples/Sec. (Total)
Accuracy	0.1% FSR
Zero Drift	10 V/ C
Span Drift	25 ppm/ C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	more than 2 M
Individual Channel Configuration	Yes
Over voltage Protection	240 Vrms
ESD Protection	4kV, Contact for each terminal
Intra-module Isolation, Field to Logic	3000 VDC
LED
Status LED	PWR LED, NET LED, MOD LED
Terminal Resister LED	1 LED as terminal resister Indicator
Alarm LED	8 LEDs as over Upper Limit Indicators 8 LEDs as under the Lower Limit Indicators
Power
Power Supply	Unregulated +10 ~ +30 VDC
Power Consumption	2.0 W
Mechanism
Installation	DIN-Rail
Dimensions	33 mm x 99 mm x 78 mm ( W x L x H )
Environment
Operating Temp.	-25 ~ 75 C
Storage Temp.	-30 ~ 80 C
Humidity	10 ~ 90% RH, non-condensing

Product features:
Industrial module
Manufacturer	ICPDAS
Module type	I/O module
Interfaces	CAN
Other	Wide temperature
I/O	Analog in
Mount type	DIN rail mounting