CAN-2018C

CAN-2018C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the thermocouple input status and set the configuration by using standard CANopen protocol. CAN-2018C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2018C has 8-channel thermocouple input. It can be used to various applications. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. For more information about the CANopen master interfaces and other CANopen products, please refer to the following web site.

Product specification
CANopen Interface
NMT	Slave
Error Control	Node Guarding protocol / Heartbeat Producer
No. of PDOs	10Rx , 10Tx
PDO Modes	Event Triggered, Remotely requested, Cyclic and acyclic SYNC
PDO Mapping	Available
No. of SDOs	1 server, 0 client
Emergency Message	Yes
CANopen Version	DS-301 v4.02
Device Profile	DSP-401 v2.1
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate (bps) Setting by Rotary Switch	10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, and 1 M
Node ID Setting by Rotary Switch	1 ~ 99
Terminator Resistor	120 Ohm
Connector	5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
EDS file	Yes
Analog Input
Channels	8
Input Type	+/- 15mV, +/- 50mV, +/- 100mV, +/- 500mV, +/- 1V, +/- 2.5V +/-20mA, (Requires Optional External 125 Ohm Resistor) Thermocouple (J, K, T, E, R, S, B, N, C)
Resolution	16-bit
Sampling Rate	10 Samples/Sec. (Total)
Accuracy	+/-0.1% FSR
Zero Drift	+/- 10 μV/°C
Span Drift	+/- 25 ppm/°C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	more than 400 k Ohm
Individual Channel Configuration	Yes
Open Thermocouple Detection	Yes
Over voltage Protection	240 Vrms
ESD Protection	+/-4kV, Contact for each terminal.
Intra-module Isolation, Field to Logic	3000 VDC
LED
Power	PWR, red
CANopen Status	RUN/ERR, green/orange
Power
Power Supply	Unregulated +10 ~ +30 VDC
Power Consumption	1.5 W
Mechanism
Installation	DIN-Rail
Dimensions	32.3 mm x 99 mm x 77.5 mm ( W x L x H )
Environment
Operating Temp.	-25 ~ 75°C
Storage Temp.	-30 ~ 80°C
Humidity	10 ~ 90% RH, non-condensing

Product features:
Industrial module
Manufacturer	ICPDAS
Module type	I/O module
Interfaces	CAN Thermocouple
I/O	Analog in
Mount type	DIN rail mounting