Accessories, power supplies
Converters
ZigBee type
Power		60W
Output voltage		48 VDC
Accessory type		Power supply
Mount type		DIN rail mounting

Catalog ConvertersPower supply unitsDIN mounted

DN-60-48

Software and manuals

Datasheet

DN-60-48

60W Din rail Power Supply Unit, output voltage 48 V DC

COTEK

Ask about price »

Request for information

Products description
Technical parameters
Product features

60W Din rail Power Supply, output voltage range: 48 V DC

Product features:

Universal AC input 88 - 264Vac
Protections: Short circuit / Over load / Over voltage
Brown-out protection
All using 105�C long life electrolytic capacitors
True DC OK signal output
High operation temperature up to 70�C
Withstand 2G vibration test
High efficiency, long life and high reliability
3 years warranty
Installed on DIN rail TS35 / 7.5 or 15
UL508 ( Industrial control equipment ) listed
UL1310 Class 2 Power unit / LPS pass

Product features:

Universal AC input 88 - 264Vac
Protections: Short circuit / Over load / Over voltage
Brown-out protection
All using 105�C long life electrolytic capacitors
True DC OK signal output
High operation temperature up to 70�C
Withstand 2G vibration test
High efficiency, long life and high reliability
3 years warranty
Installed on DIN rail TS35 / 7.5 or 15
UL508 ( Industrial control equipment ) listed
UL1310 Class 2 Power unit / LPS pass

Product specification
Output
DC Voltage Range	48 V
Rated Current	1.25 A
Current Range	0 ~ 1.25 A
Ripple and Noise (max.)	180 mVp-p
Rated Power	60 W
Voltage Adj. Range	43.2 ~ 52.8 V
Voltage Tolerance	+/- 1%
Line Regulation	+/- 1%
Load Regulation	+/- 1%
Setup, Rise Time	less than 800ms, less than 50ms/230Vac at full load
Hold Up Time (Typ.)	> 32ms / 230VAC >16ms / 115VAC at full load
Input
Voltage Range	88 V ~ 264 VAC 124 ~370 VDC
Frequency Range	47 Hz ~63 Hz
Efficiency (Typ.)	88 %
AC Current (Typ.)	1.3 A / 115VAC 0.6A / 230VAC
Inrush Current (Typ.)	COLD START 30A / 115VAC 60A / 230VAC
Leakage Current	< 1mA / 230VAC
Protection
Over Load	> 102 % rated output power Protection type : constant current limiting, automatically after fault condition is removed
Over Voltage	115% ~ 150% rated output voltage Protection type : latch-off mode
Environment
Working Temp.	-20C ~ 70C (Refer to output load de-rating curve)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85C, 10 ~95% R.H
Temp.Coefficient	+/- 0.03%/C (0 ~ 50C)
Vibration	10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. Each along X,Y,Z axes
Safety and EMC
Safety Standards	UL508, TUV EN60950-1 : 2006+A11, UL1310 NEC class 2 compliant
Withstand Voltage	I/P - O/P : 4242 DC I/P - FG : 2121 DC 1 minute
Isolation Resistance	I/P - O/P, I/P - FG, O/P - FG: 100M Ohm / 500VDC
EMI Conduction and Radiation	EN55022 : 2006 Class B
Harmonic Current	EN61000-3-2: 2006 Class A, EN61000-3-3: 1995+A1: 2001+A2: 2005
EMS Immunity	EN61204-3: 2000, EN55024:1998+A1: 2001+A2: 2003 light industry level, criteria A
Others
Colling	Free Air convection
Packing	0.3kg ; 27Pcs / 9.3kg
DC OK signal	Relay contact (30VDC / 1A , 120VAC / 1A)
Connection	I/P 3 poles, O/P : 6 poles screw DIN termina
Dimension (WHD)(mm)	40x90x99
MTBF (MIL-HDBK-217F)	944.6K HR

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25�C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
De-rating may be needed under low input voltages. Please check the de-rating curve for more details.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Product features:
Accessories, power supplies
Converters
ZigBee type
Manufacturer	COTEK
Power	60W
Output voltage	48 VDC
Accessory type	Power supply
Mount type	DIN rail mounting