GREENTEL R201 series is Machine-to-machine (M2M) industrial cellular router with Din-rail mounting, which works on 2G/3G cellular networks, provides reliable and robust wireless connections.
GREENTEL R201 series is specified for industrial M2M usage. Designed to endure extreme conditions, such as temperatures ranging from -25°C to +70°C and low power consumption.
GREENTEL R201 series also supports the PPTP, L2TP, GPE, IPSec VPN tunnel providing high-grade network security.
Industrial power terminal block, 9 to 48VDC wide range voltage power supply, anti-RCE(reverse connection error), over-current protection
One Ethernet port, one RS232 for debug console, one RS232 or RS485 optional
Support DTU mode, data transparent transmission via serial port
Support Modbus RTU/TCP via RS485 (Optional)
Wide range operation temperature: -25°C to 70°C
Operation humidity: 5% to 95%, non-condensing
IP30 grade protection
Optimized EMC design
Applications:
Machine-to-machine (M2M)
Telemetry
SCADA
Monitoring and Surveillance
DSL/Cable Infrastructure Backup
AVL
Credit card verifications, POS and ATM
Product Kit:
M2M Industrial Cellular Router
AC/DC Adapter
Rubber antenna and magnetic mount antenna optional
DIN-rail optional
RS232 to RS485 converter optional
Ethernet Cable RJ45
Debug console cable RJ45-RS232 optional
CD
Mechanism
Device Manager for large scale remote management:
Remote Configuration: configure your devices remotely;
Mass Upgrade: realize auto remote upgrade and auto mass remote upgrade of devices; manage router’s Firmware version;
Large Quantity of Access Points: can manage more than 800 access points of routers, and can expand through upgrading or extension;
High Practicality: adaptable to network of any structure - Internet, VPDN, wireless DDN, and other private networks;
B/S Structure: no need of special software or configurations on client-end and can just monitor routers anywhere anytime;
Multi-Level User Authority Management: secure system and devices;
GIS-Based Status Monitoring: support GPS, provide vector map location management;
Online Status Real-time Monitoring: online, offline, alert;
Alert: support local interface alert, SMS and E-mail alert;
Historical Data Inquiry: inquire and get on/offline status of designated devices;
Connection Statistics Report: provide connection statistics for analyzing connection status;
Extended Service Monitoring: By upgrading router, implement monitoring of devices(PLC, controller, intelligent equipment, PC, etc.) that are connected to routers;
Remark: This software is not default kit for R201 series router. For detail information please contact us.
Product specification
Cellular
GPRS(R200G)
GSM/GPRS 900/1800 MHz Dual Band or 850/900/1800/1900 MHz Quad
Band optional, GPRS Class 10, DL/UL 85.6/21.4 Kbps or 64.2/42.8
Kbps
USB 2.0 host port x1, without embedded cellular module, connects
to external 3G USB Modem Remark:
Please refer to 3G Modem Support List to make sure your
wireless modem is supported by R200U
APN
APN and VPDN
Authentication Protocol
CHAP/PAP/MS-CHAP/MS-CHAP2/etc.
Dial On Demand
Activated by Call/SMS/Local data flow
Always online
PPP LCP echo and ICMP keep alive for link inspection
High Sensitivity
low signal strength required (CSQ more than 12)
Ethernet
Interface
one 10M/100Mbase-T RJ45, auto MDI/MDI-X
Isolation Protection
1.5 kV between signals and Gnd
Serial Ports
Port
3-Lined RS232 Serial Port X 1 (Optional with RS485) with
screw pluggable terminal block, pitch=5mm interface
3-Lined Debug Console Serial Port X 1 with
RJ45 interface
3-Lined RS232/485 Serial Port X 1 (Optional with RS232) with
screw pluggable terminal block, pitch=5mm interface
Rate
1200bit/s to 115200bit/s
Communication Parameters
Parity: None, Even, Odd, Space, Mark Data Bits: 5,6,7,8 Stop
Bits:1,1.5,2
Flow Control
None
Isolation Protection
1.5 kV between signals and Gnd
USB Port (R200U)
Interface
USB 2.0 Host port, Female Type-A
System Management
Configuration
WEB, TELNET, Hyper Terminal and SSH
Upgrade
Remote and local firmware upgrade based on redundant firmware
backup
Network Management
Self developed large scale management system
Network Features
Routing
Static routing
Multi-Protocol Support
ICMP, IP, TCP, UDP, DHCP, PPP,
ARP, Telnet, DNS, SSH, VRRP,
HTTP, HTTPS, NTP
Connection Inspection
PPP LCP echo and ICMP keep alive for link inspection
NAT and PAT
Network Address Translation (NAT) and Port Address Translation
(PAT), hiding internal IP addresses and expand IP address space.
DDNS
Support Dynamic DNS
VRRP
Hot backup, auto switch to slave router when master router
failed
Network Security
VPN IPSec Tunnel (Maximum 4 tunnels)
Support standard IPSec based VPN service, encryption methods
including DES, 3DES, AES, data verification methods including
MD5 and SHA-1
Authentication Method
Pre-shared key, digital certificate
PPTP, L2TP, GRE
Client
Firewall Strategy
Stateful Packet Inspection(SPI), filtering multicast, filtering
PING packet, preventing DoS attack, different firewall
strategies
MAC Address Bundling
Refuse illegal host access
Port Mapping
Allow extranet user to access specific intranet port
Access Control
Flexible access control of TCP, UDP, ICMP packet
Traffic Control
Downlink and Uplink speed control
DMZ
Support virtual servers
Embedded
Advanced
Functions
Beep
Configurable alarm output
Real-time Clock
Provide the system with accurate local time
Watchdog
With both software and hardware watchdog, insure system against
dead-halt
Signal Strength LED
3-level LED indication of cellular network signal strength
Running Status LED
4 Running Status LEDs: POWER, STATUS, WARN, ERROR
Power Supply
Power Input
9 to 48VDC, anti-RCE (reverse connection error), over-current
protection
DC500V imposed on communication lines to ground and on power
lines to ground, resistance more than 500MQ
Electric Strength
DC500V imposed on communication circuit to ground and on power
lines to ground, leakage current 0MA
Anti-shock
IEC60068-2-27
Drop
IEC60068-2-23
Vibration
IEC60068-2-6
EMC
ESD
Meet EN61000-4-2, Electrostatic discharge: Level 4, 8KV to all
communication ports Air discharge: Level 4, 15KV to all parts
of outer casing
Surge
Meet EN61000-4-5, Level 3, between each group of lines and
chassis ground, differential-mode 1KV peak,
common-mode 2KV peak, 1.2/50us not applicable to serial ports Meet EN61000-4-4, power
to Bluetooth
to GPRS
