This unit is designed to provide a RS- 232/422/485 connection over serial cable where the connected devices have RS-232/422/485 interfaces. Enabling serial devices such as CNCs and PLCs to instantly connect to an existing IP network, the Serial-to-Ethernet Device Server / Managed Media Converter represents a robust solution for devices controllers for MIS personnel. This product can either be used as Device Server or Managed Media Converter.

 Device Server & Managed Media Converter Mode option
 Complies with EIA/TIA and IEEE standards
 Supports 4 wires full duplex asynchronous serial data transmission (RS-422/485)
 Supports 2 wires half-duplex asynchronous serial data transmission (RS-485)
 Supports serial port asynchronous data rates up to 115.2 Kbps
 Extended distances up to 1.2 km (24 AWG) using RS-422/485
 Auto-detecting 10/100 Mbps Ethernet interface
 Terminator feature improves signal quality and distance
 LEDs for ‘at-a-glance’ device status
 Wall mount or Din-Rail mountable installation
 Power range 9~32V DC
 FCC Class A & CE approved

Standards: IEEE 802.3 (10BASE-T Ethernet);
IEEE 802.3u (100BASE-TX/ Fast
Ethernet); EIA/TIA RS-232/422/485; EIA/TIA-574
Ports: 1x UTP 100/120ohm; RJ-45 type 1x 9-pin serial connector; D-sub, Male
Max. Distance: UTP: 100 meters (Cat 3/4/5.)
Serial: 15 meters (RS-232) 1,200 meters (RS-422, RS-485)
Data Rates: UTP: 10 or 100 Mbps
Serial: 115.2 kbps (asynchronous)
Signals: RS-232: TxD, RxD, CTS, RTS, DTR, DSR, RI, DCD, GND RS-422: TxD+/-, RxD+/-, GND RS-485: Data+, Data-, GND
Configuration: Bits Per Second: 38400
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None (The console connection is only available once the DIP switch 1 is ON) Switches:
DIP 1: Enables / disables console / data communication mode
DIP 2: Enables / disables RS-232
DIP 3: Enables / disables RS- 422/485 (4-wire)
DIP 4: Enables / disables RS-485 (2-wire)
DIP 5: N/A
DIP 5: N/A
DIP 7: Enables / disables termination (TMR)
Power: External power adapter; 9~32V DC @ 800mA
Frequency: 47Hz to 63Hz
Environment: Temperature:
Operating: 0°C to 50°C
Relative Humidity: 10% to 80%, non-condensing
Storage: -20°C to 80°C
Relative Humidity: 5% to 90%, non-condensing
Emissions: FCC Part 15 of Class A & CE approved
Dimensions: 109.2 x 90 x 30mm (L x W x H)
Weight: 280 grams