Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.
Product specification |
LAN |
Ethernet |
10/100 Mbps, Auto-select lOBaseTor 100BaseTX |
Connector |
RJ45 |
Protection |
1.5KV Magnetic Isolation |
LED Indicate |
s1 |
LED steady for port 1 transmission |
S2 |
LED steady for port 2 transmission |
FDX |
LED steady when full-duplex transmission |
Speed |
LED steady lit when in 100M mode |
Power |
LED steady when power on |
Power |
Input Power |
12-48VDC External Power, Terminal Block and DC Jack type (Redundant
Power Input) |
Protection |
Terminal BlockType |
|
(Protects against V+ and V- reverse) |
Power Consumption |
|
300mA (at 12V level) |
Serial Communication |
Interface |
RS-422 and RS-485 |
Controller |
SUNIX SUN8989 |
No. of Port |
2 ports |
Port Type |
DB9 Male |
RS-485 Signal Control |
SUNIX ARSC technology |
Select RS-422 or RS-485 |
RS-422/485 Auto Detect and Switch |
RS-422 Signal |
TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND |
RS-485 Signal |
Data+/-, RTS+/-, CTS+/-, GND |
Throughput |
1 Mbps shared by each serial port |
Baud rate |
300bps ~ 921.6 Kbps |
Data bit |
5,6,7,8 |
Stop bit |
1,1.5,2 |
Parity |
even, odd, none, mark, space |
Flow Control |
None, Xon/Xoff, Hardware |
Protection |
2KV ESD protection for all signal |
Dimensions |
144
x 90 x 30 mm (with Mounting Kit)
|
(WxDxH) |
120 x 90 x 25 mm |
Regulatory Approvals |
CE,
FCCOperation Environment |
Operation
Environment |
Operation Temperature |
0 to 60C |
Operation Humidity |
5 to 95% RH |
Storage Temperature |
-20Cto
85C |