GE-25-24

Enclosed Power Supply Unit, power 26.4 W, output voltage 24 V DC

COTEK

Products description
Technical parameters

Enclosed Power Supply, power 26.4 W, output voltage 24 V DC

Product features:

No-load power consumption < 0.5W (< 1 W GE150 only)
Protections: Short circuit / Over load / Over voltage
Brown-out ( Low AC Input voltage)
Cooling by free air convection
Power ON with LED indicator
High operation temperature up to 70°C
100% full load burn-in test
Withstand 5G vibration test
High efficiency , long life and high reliability
All using 105°C long life electrolytic capacitors

Products description
Technical parameters

Product specification
Output
DC Voltage Range	24 V
Rated Current	1.1 A
Current Range	0 ~ 1.1 A
Ripple and Noise (max.)	120 mVp-p
Rated Power	25.5 W
Voltage Adj. Range	+/- 10%
Voltage Tolerance	+/- 1%
Line Regulation	+/- 0.5%
Load Regulation	+/- 0.5%
Setup, Rise Time	less than 800ms, 80ms / 230 VAC; less than 1000ms, 80ms/230Vac at full load
Hold Up Time (Typ.)	> 32ms / 230VAC >10ms / 115VAC at full load
Input
Voltage Range	88 V ~ 264 VAC 125 ~373 VDC
Frequency Range	50 Hz / 60 Hz
Efficiency (Typ.)	87 %
AC Current (Typ.)	0.7 A / 115VAC 0.35A / 230VAC
Inrush Current (Typ.)	COLD START 30A / 115VAC
Leakage Current	< 2mA / 240VAC
Protection
Over Load	> 110 % rated output power Protection type : constant current limiting, automatically after fault condition is removed
Over Voltage	115% ~ 150% rated output voltage Protection type : latch-off mode
Environment
Working Temp.	-25C ~ 70C (Refer to output load de-rating curve)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85C, 10 ~95% R.H
Temp.Coefficient	+/- 0.03%/C (0 ~ 50C)
Vibration	10 ~ 500Hz, 5G 10min./1 cycle, period for 60 min. Each along X,Y,Z axes
Safety and EMC
Safety Standards	UL60950-1, 2nd edition, TUV EN60950-1: 2006 + A11 Approved
Withstand Voltage	I/P - O/P : 3KVAC (4242 DC) IP-FG: 1.5K VAC (2121 DC) O/P-F/G: 0.5K VAC (707 DC), 1 minute
Isolation Resistance	I/P - O/P, I/P - FG, O/P - FG: 100M Ohm / 500VDC
EMI Conduction and Radiation	EN55022 : 1998+A1: 2000+A2: 2003 Class B
Harmonic Current	EN61000-3-2: 2000 +A2, 2005 Class A, EN6 1000-3-3: 1995+A1: 2001
EMS Immunity	EN61204-3: 2000, EN55024: 1998+A1, 2001+A2, 2003 light industry level, criteria A
Others
Packing	0.18kg ; 60Pcs / 13kg
Dimension (WHD)(mm)	795128
MTBF	620.3 K HRS Compliance, MIL-HDBK-217F

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
De-rating may be needed under low input voltages. Please check the de-rating curve for more details.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Quick registration

Country

First name

Company name

Phone

Your e-mail address

Password

Repeat password

I agree with TechBase Privacy Policy. It follows legal statements and includes your rights for modify and remove your personal data anytime.