Danfoss ECL300 controller operation bi-directional data exchange (write/read) with controller in Modbus RTU1 protocol. Modbus TCP protocol available from Ethernet side. ARM9 CPU 180 MHz, 128 MB SDRAM memory, 8 MB Flash, Linux, 1x Ethernet, 1x RS-485, www, linux, ARM 9 180 MHz, fanless, box, di, do, programmable, device server, telemetry module, SNMP, 2x RS-232, SD card

Danfoss ECL200/300 controller operation bi-directional data exchange (write/read) with controller in service protocol. Modbus TCP protocol available from Ethernet side. ARM9 CPU, 180 MHz, 128 MB SDRAM, 8 MB Flash, SD card slot, Linux, 1x Ethernet, 2x RS-232, www, fanless, box, di, di, programmable, device server telemetry module, SNMP, RS-485, coverter, do

NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz, 1024 MB Ram, 8/16/32 GB Industrial Flash, Linux 4.19+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway

Industrial computer NPE 9500, Quad-core Cortex A53 1.2 GHz, 1024 MB Ram, 8/16/32 GB eMMC Flash, Linux 4.19+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT

Linux-ready ATMEL AT91RM9200 180MHz Single Board Computer, ARM9, 64MB SDRAM, 10/100BaseT, 4x TTY, SD, 32x CMOS I/O, embedded

iMod X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz, 1024 MB Ram, 8/16/32 GB Industrial Flash, Linux 4.19+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, Modbus protocol support, fanless

Danfoss ECL200/300 controller operation bi-directional data exchange (write/read) with controller in service protocol. Modbus TCP protocol available from Ethernet side. ARM9 CPU, 180 MHz, 32 MB SDRAM, 8 MB Flash, SD card slot, Linux, 1x Ethernet, 2x RS-232, www, fanless, box, di, do, programmable, device server telemetry module, SNMP, 1x RS-485

Danfoss ECL200/300 controller, bi-directional data exchange, Modbus TCP from Ethernet side, Modem GSM/GPRS, ARM9 CPU, 180 MHz, 128 MB SDRAM, 8 MB Flash, SD card slot, Linux, 1x Ethernet, 2x RS-232, www, fanless, box, di, do, programmable, device server telemetry module, SNMP, 1x RS-485

Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 800MHz, 32 I/O, 6xRS-232, 2xRS-485, CAN, 2xEthernet, 1-Wire, USB 2.0, 3 expansion cards, LTE, embedded computer, zigbee, IoT, iMod, Wi-Fi, Bluetooth, GPIO, GPS, Modbus, MQTT, SNMP

Industrial computer NPE X500 Plus, ARM11, 700MHz, 512 MB Ram, 4096 MB Flash, Linux 3.6, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 3 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 2 x AI, 1 x 1-Wire, 1 x USB 2.0, 1 x SIM CARD slot, LTE, M-Bus, Wi-Fi, Bluetooth, GPS, Zigbee, IoT

Industrial Programmable Automation Controller Board with 16x isolated DI and 8x Darlington-pair DO, 64MB SDRAM, daughter board, Linux-based, embedded, ARM9 180MHz

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 1GB Flash mem. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, do, www, usb, zigbee, 4xAI, 2xDO, 2 x relay outputs, built in GSM/GPRS/EDGE

Fanless Embedded System, AMD Geode LX800 500 MHz, CF, 3x RS-232, 1x RS-232/422/485, audio, 20W, 3x USB, VGA, 2x LAN, PS/2, LPT, DI/O

Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), DDR3, SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC

Industrial Programmable Automation Controller with 4x 16-bit A/D input, 8x 2500Vrms opto-isolated DI and 8x 500mA high-drive DO, PAC, SoM, CPU ARM9 180 MHz, analog input, digital input, 2x 10/100BaseT, RS-232/485, USB, SD, Linux, embedded

Embedded computer, VIA C7 1.5GHz, do 1GB RAM, 3x RS232, 1x RS232/RS422/RS485, VGA, 1x PS/2, 2x USB, 1x 100base-tx, LPT, Audio, CF, fanless, din rail

Embedded computer, Intel Atom N450 1.66GHz single core, DDR2 SODIMM do 2GB, 1x RS-232/422/485, 2x RS-232, 1x VGA, audio, 2x 1000base-TX RJ-45, 4x USB, 1x 2.5" SATA HDD, CF, 1x PCIe, wifi, 3g, GPS, AC 60W, fanless, bt

Linux-based Programmable Automation Controller, CPU ATMEL 400MHz, SDRAM 65MB, 2x 100base-TX RJ-45, 2x RS232, 2x RS485, 2x USB, microSD, linux, 8x DI, 8x DO

Embedded computer, Intel Atom D510 1.66GHz dual core, DDR2 SODIMM do 2GB, 1x RS-232/422/485, 2x RS-232, 1x VGA, audio, 2x 1000base-TX RJ-45, 4x USB, 1x 2.5" SATA HDD, CF, 1x PCIe, wifi, 3g, GPS, AC 60W, fanless, DVI