RS232/422/485 to Ethernet converter, device server, 1x 100Base-TX RJ-45, wt, CPU 25MHz, TCP, SNMP, RS232/422/485 to Ethernet converter, device server, 1x 10Base-T or 1x100Base-TX RJ-45, wt, CPU 25MHz, 64KB OTP ROM

Modbus gateway, 1x RS-232/422/485, 1x RJ-45, TCP, ASC, RTU, SNMP, HTTP

WiFi Router, 4x 100base-TX RJ-45, 1x WAN 10/100Mbps, 1x RS-232, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

GPS+GPRS ROUTER, EGSM900/GSM1800MHz, GPRS, 1x 100base-TX RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

Programmable industrial converter Modbus TCP to Modbus RTU / MQTT / SNMP, up to 6x RS-232/485, up to 2x Ethernet TCP, up to 2x GPRS/3G/4G/LTE modem

Programmable industrial SNMP gateway/converter, up to 8x RS-232/485, up to 2x Ethernet TCP, GPRS/3G/4G/LTE modem

Danfoss ECL300 controller operation bi-directional data exchange (write/read) with controller in Modbus RTU1 protocol. Modbus TCP protocol available from Ethernet side. ARM9 CPU 180 MHz, 128 MB SDRAM memory, 8 MB Flash, Linux, 1x Ethernet, 1x RS-485, www, linux, ARM 9 180 MHz, fanless, box, di, do, programmable, device server, telemetry module, SNMP, 2x RS-232, SD card

Danfoss ECL200/300 controller operation bi-directional data exchange (write/read) with controller in service protocol. Modbus TCP protocol available from Ethernet side. ARM9 CPU, 180 MHz, 128 MB SDRAM, 8 MB Flash, SD card slot, Linux, 1x Ethernet, 2x RS-232, www, fanless, box, di, di, programmable, device server telemetry module, SNMP, RS-485, coverter, do

GPS+GPRS, EGSM900/GSM1800MHz, GPRS, WiFi, 4x 100base-TX RJ-45, 1x WAN 10/100Mbps, 1x RS-232/422/485, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

GPS+CDMA ROUTER, CDMA2000 1xRTT 800MHz, 1x 100base-TX RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

GPS+EDGE, GSM850/900/1800/1900MHz, GPRS, WiFi, 4x 100base-TX RJ-45, 1x WAN 10/100Mbps, 1x RS-232, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

iMod X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz, 1024 MB Ram, 8/16/32 GB Industrial Flash, Linux 4.19+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway

GPS+CDMA2000 1X EVDO ROUTER, CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz, CDMA2000 1X RTT, IS-95 A/B, 1x 100base-TX RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

GPS+EDGE ROUTER, GSM850/900/1800/1900MHz, GPRS, EDGE, 1x 100base-TX RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, Modbus protocol support, fanless

Industrial computer NPE 9500 with iMod Software, Cortex-A53 4x1.2GHz, 1024 MB Ram, 8 / 16 / 32 GB eMMC Flash, Linux 4.19+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, Telemetry Module, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, embedded box, serial server, IoT, iMod, GPIO, Modbus, MQTT, SNMP

GPS WCDMA industrial router, HUDPA, HSUPA, GSM 850/900/1800/1900MHz, GPRS, EDGE, 1x 10/100base-Tx RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

GPS+EDGE, GSM850/900/1800/1900MHz, GPRS, WiFi, 4x 100base-TX RJ-45, 1x WAN 10/100Mbps, 1x RS-232, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

ZigBee+GPRS ROUTER, EGSM900/GSM1800MHz, GPRS, 1x 100base-TX RJ-45, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP

ZigBee+GPRS, EGSM900/GSM1800MHz, GPRS, WiFi, 4x 100base-TX RJ-45, 1x WAN 10/100Mbps, 1x RS-232/422/485, TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP