I-87026PW

The 87026PW is a multifunction module that includes 6 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA or 0 ~ 20 mA), analog outputs are 12 bit at +/-5 V, +/-10 V, 0 ~ 20 mA or 4 ~ 20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable.

Product specification
Analog Input
Input Channels	6 (Differential)
Input Type	+/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V +/-20 mA, (Jumper Selectable)
Resolution	Normal Mode 16-bit Fast Mode 12-bit
Sampling Rate	Normal Mode 10 Samples/Sec. Fast Mode 60 Samples/Sec. (Total)
Accuracy	Normal Mode +/- 0.1% Fast Mode +/-0.5% or better
Bandwidth	Normal Mode 15.7 Hz Fast Mode78.7 Hz
Zero Drift	+/-20 uV/C
Span Drift	+/- 25 ppm/ C
Input Impedance	Voltage 2 M Current 125
Common Mode Rejection	86 dB Min.
Normal Mode Rejection	100 dB
OverVoltage Protection	240 Vrms
Individual Channel Configuration	Yes
Analog Output
Output Channels	2
Output Type	+0 V ~ +5 V, +/-5 V, +0 V ~ +10 V, +/-10 V,+0 mA ~ +20 mA, +4 mA ~ +20 mA (jumper selectable)
Resolution	12-bit
Accuracy	+/-0.1% of FSR
Voltage Output Capability	10 V @ 20 mA
Current Load Resistance	500
Power-Up and Safe Value	Yes
Open Wire Detection for Current Output	Yes, Only 4 ~ 20 mA.
Digital Output
Output Channels	2
Output Type	Isolated Open Collector (Sink)
Max Load Current	700 mA/channel max.
Load Voltage	+3.5 VDC ~ +50 VDC
Overvoltage Protection	60 VDC
Overload Protection	Yes
Short Circuit Protection	Yes
Power-on Value	Yes, Programmable
Safe Value	Yes, Programmable
Digital Input
Input Channels	2
Input Type	Wet contact (Sink)
Off Voltage Level	+3.5 VDC ~ 50 VDC
On Voltage Level	+1 VDC Max.
Input Impedance	10 K, 0.66W
Counters	Channels 2 Max. Counts 32-bit Max. Input Frequency 100 Hz Min. Pulse Width 5 ms
Overvoltage Protection	70 VDC
Communication
Interface	RS-485
Format	N, 8, 1
Baud Rate	1200 ~ 115200 bps
Protocol	DCON
Dual Watchdog	Yes, Module (1.6 Seconds) Communication (Programmable)
LED Display	1 LED as Power Indicator 2 LED as Digital Input indicator 2 LED as Digital Output indicator
Isolation
Intra-module Isolation,Field-to-Logic	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for Each Terminal 8 kV Air for Random Point
Power
Power Consumption	1.8 W
Environment
Operating Temperature	-25 ~ +75 C
Storage Temperature	-30 ~ 80 C
Humidity	5 ~ 95% RH, non-condensing
Dimensions	30 mm x 102 mm x 115 mm (W x L x H)

Product features:
Industrial module
Converters
ZigBee type
Manufacturer	ICPDAS
Module type	I/O module
I/O	Analog in Analog out Digital in Digital out