M-7065

M-7065 is a data acquisition and control module, digital input/output. The module can be remotely controlled using a set of commands, which we call the DCON protocol. Communication between the module and the host is in ASCII format via an RS-485 bi-directional serial bus standard. Baud Rates are software programmable and transmission speeds of up to 115.2K baud can be selected. The functionality of the M-7000 series is the same as the I-7000 series, except M-7000 series offers extended support for the Modbus RTU protocol.

Product specification
Digital Input
Channels	4
Input Type	Sink, Source, isolated channels with common ground or power
Off Voltage Level	+1 V max.
On Voltage Level	+4 ~ +30 V
Input Impedance	3K Ohm, 0.5 W
Counters	channels : 4 Max. Counts: 16-bit (65535) Max. Input Frequency : 100 Hz Min. Pulse Width : 5 ms
Optical Isolation	3750 Vrms
Relay Output
Channels	5
Relay Type	Form A relay SPST (N.O.)
Contact rating	AC: 250 V @ 5 A DC: 30 V @ 5 A
Operating Time(Max.)	6 ms
Release Time(Min.)	3 ms
Total Switching Time	10ms
Surge Strength	4,000 VAC
Insulation Resistance	1000 M Ohm min. at 500 VDC
Life Time	Mechanical : 20 X 10^6 OPS Electrical : 100 X 10^3 Full Load
Interface
Interface	RS-485
Format	N, 8, 1/N, 8, 2/E, 8, 1/O, 8, 1
Baud Rate	1200 ~ 115200 bps
LED Display
LED Display	1 LED as Power/ Communication indicator 4 LEDs as Digital Input indicators and 5 LEDs as Relay Output indicators (for M-7065D)
Power
Input Voltage Range	10 ~ 30 VDC
Power Consumption	1.3 W (max.)(M-7065) / 1.3 W (max.)(M-7065D)
Protocol
Support Modbus and DCON Protocol	Yes
Environment
Operating Temperature	-25 ~ 75 C
Storage Temperature	-40 ~ 85 C
Humidity	5 ~ 95 %, non-condensing

Product features:
Industrial module
Converters
ZigBee type
Manufacturer	ICPDAS
Module type	I/O module Relay module
Device features	Modbus
I/O	Digital in Digital out Isolated input Relay output