NS-206FT

The NS-206FT (ST Connector; Multi-mode) is a Unmanaged 4-Port Industrial 10/100 Base-T(X) with Dual 100 Base-FX Switch that secures data transmission by using fiber optic transmission to provide immunity from EMI/RFI interference. It is used Ethernet for transmitting a signal up to 2 Km(6,600 ft), and is the perfect solution for applications where transmission must be protected from electrical exposure, surges, lightning or chemical corrosion. The NS-206FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125μm fiber cables; in half duplex mode, range is 412m with 62.5/ 125μm fiber cables. The Ethernet supports 10/ 100M auto-negotiation feature and auto MDI /MDIX function.

Features:

Automatic MDI / MDI-X crossover for plug-and-play Each port supports both 10/100 Mbps speed auto negotiation Store-and-forward architecturel Full duplex IEEE 802.3x and half duplex backpressure flow control 1.6Gbps high performance memory bandwidth Frame buffer memory : 256 Kbit Integrated look-up engine with dedicated 1 K unicast MAC addresses Supports +10~+30Vdc voltage Supports operating temperatures from 0 ~ +70°C DIN rail mount for industrial usage

Product specification
Technology
Standards	IEEE802.3, 802.3u, 802.3x
Processing Type	Store and forward wire speed switching - no delays
MAC Addresses	1024
Memory Bandwidth	1.6 Gbps
Flow Control	IEEE802.3x flow control, back pressure flow control
Interface
RJ45 port	10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection
Fiber Optic port	100 Base-FX(Multi-mode ST connector)
LED Indicators	10/100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ethernet Isolation	1500 Vrms 1 minute
Frame Ground for EMS Protection	Yes
Fiber Optic	Multi mode fiber cables:50/125, 62.5/125 or 100/140 m Distance :2 km, (62.5/125 m recommended) for full duplex Wavelength : 1300 or 1310nm Min. TX Output:- 20 dBm Max. TX Output: -14 dBm RX Sensitivity: -34 to -31 dBm
Ethernet Transmission distance	Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Power
Input Voltage Range	+10 ~ +30VDC (Non-isolation)
Power consumption	0.24A@24VDC, +/- 5% arrowed with 100M Full duplex
LED Indicator	Yes
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	5-Pin Removable Terminal Block
Mechanical
Case	Plastic
Flammability	UL 94V-0
Dimensions	64mm x 110mm x 98mm (W x H x D)
Installation	DIN rail mount
Environmental
Operating Temperature	0 ~ +70C
Storage Temperature	-20 ~ +85C
Ambient Relative Humidity	10% to 90% non-condensing

Product features:
Industrial module
Industrial Ethernet Devices
Industrial Ethernet
ZigBee type
Manufacturer	ICPDAS
Interfaces	Ethernet Optic fiber
Ethernet device type	Switch Unmanaged switch
Network interfaces	10/100 TX 100Mb FX
Network connector	ST
Number of network ports	Up to 8
Accessory type	Connector
Switch features	Multi mode