Industrial computers
Embedded module
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Converter type		Programmable converter

All products Industrial computingEmbedded Computers / boxLinux EmbeddedEmbedded

M-501 System-On-Module

Price
Download

Availability:

product is available

Price:

Add to cart

Negotiate

Inquiries:

Request for information

Bonus:

+ 724 ProfitPoints

M-501 System-On-Module

Linux-ready ARM9 180MHz Embedded SoM

Artila

Products description
Technical parameters
Product features

The M-501 is a credit card size ARM9-based SoM (System-on-Module). It includes an ATEML AT91RM9200 ARM9 CPU, 64MB SDRAM and 16MB Flash. The operation system, Linux kernel 2.6.x with file system support, is pre-built in the M-501.

M-501 Hardware Black Diagram

Features

ATMEL AT91RM9200 CPU, 200MIPS @180MHz, with MMU.
64MB SDRAM, 16MB NOR FLASH memory
One 10/100 Mbps Ethernet interface with on-board PHY and transformer
Two USB 2.0 Host ports, supports full speed (12 Mbps)
One SD (secure digital) interface, supports SD mode.
Four 921.6kbps UARTs supports hardware flow control
I2C (Inter-IC) bus
I2S (Inter-IC Sound) bus, one transmitter and one receiver
SPI (Serial Peripheral Interface) with 2x chip select signals
32x general-purpose IOs (GPIO), CMOS/3.3V compatible
External local bus (A0-A7, D0-D7), with 4x chip select signals
Small footprint, 80x50mm only
Ultra low power consumption, less than 2.5W
Linux 2.6.x OS is pre-built in the FLASH, supports file system
GNU C/C++ tool chain is included

Products description
Technical parameters
Product features

Specification
Hardware Specifications
CPU/Memory
CPU	ATMEL 180MHz AT91RM9200 (ARM9, w/MMU)
Memory	64MB SDRAM, 16MB Flash
Network Interface
Type	Ethernet, 10/100 Mbps
PHY	DAVCOM DM9161
Isolation	1.5 KV
USB
Host	x2, USB 2.0 compliant
Signals	UdataA+, UdataA-,UdataB+,UdataB-
UART
Port0	TXD0, RXD0, RTS0, CTS0, GND
Port1	TXD1, RXD1, RTS1, CTS1, DCD1, DTR1, DSR1,GND
Port2	TXD2, RXD2, RTS2, CTS2,GND
Port3	TXD3, RXD3, RTS3, CTS3,GND
Signal Level	CMOS/3.3V compatible
Common UART Parameters
Baud Rate	Up to 921.6 Kbps
Data Bits	5 to 8 bits
Parity	None, Even, Odd, Mark, Space
Stop	1, 1.5, 2 bits
Flow Control	RTS/CTS, XON/XOFF, None
UART Port 0 advanced feature, (when Port0 used as RS-485)
	Supports 9-bit Multi-drop mode
	Supports hardware auto direction control
I2C (Inter-IC Bus)
Signals	TWD, TWDK
Supported devices	(driver has been built-in) Real-time Clock: Ricoh RS5C372 EEPROM: ATMEL AT24C16 and compatibles
I2S (Inter-IC Sound)
Transmitter	TSCK, TWS, TSD
Receiver	RSCK, RWS, RSD
SPI (Serial Peripheral Interface)
Signals	MISO, MOSI, SPCK, CS1, CS2
SD (Secure Digital Card Interface)
Signals	MCCDA, MCCK, MCDA0~MCDA3
Compatible with SD memory card Specification 1.0
Watchdog timer
	CPU built-in internal watchdog timer, used by Linux kernel
General-Purpose IOs (GPIO)
	32 GPIOs, can be programmed as digital input or output
	Support interrupt function when GPIO set as digital input
Signal Level	CMOS/3.3V Compatible
Pre-defined Pins
	Reset Button (CN2, pin#35), input
	Buzzer (CN2, pin#37), output
	2-pin DIP SW (CN2, pin#12,13), input
	System ready LED (CN2, pin#38), output
	LAN activity LED (CN3, pin#11), output
Undefined Digital IO Pins (reserved)
CN1	pin#23, #24, #25, #26
CN3	pin#23, #24
Debug ports
JTAG port	for low level debug
Console port	Tx/Rx serial console (share RTS2, CTS2)
Local Bus
Data bus	8-bit (D0~D7)
Address bus	8-bit (A0~A7)
Chip select	x4 (NCS3~NCS6)
Control bus	RD, WR
Signal Level	CMOS/3.3V Compatible
Power Consumption
Input range	3.0 to 3.6VDC (3.3V nominal)
Consumption	2W
Mechanism
Board dimension	50 x80mm
Mounting holes	x4, 2.0mm(M2) diameter
	CN1: 28 pins; CN2: 50 pins; CN3: 50 pins
	Connectors (2.0mm pitch)
Software Specification
General
OS	Linux kernel 2.6.X
Boot Loader	U-Boot 1.1.2
File systems	JFFS2, EXT2/EXT3, VFAT/FAT, NFS
Protocol Stacks
	support IPV4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V3,SSL, SSH 1/2
Pre-load Utilities
Bash	Shell Command
Telnet	Telnet client program
Busybox	Linux utility collection
FTP	FTP client program
Pre-load Daemons
pppd	Dial In/out over serial port and PPPoE
snmpd	SNMP agent program
telnetd	Telnet server program
inetd	TCP server program
ftpd	FTP server program
boa	Web server program
sshd	secured shell server
iptables	Firewall service manager
armd	Artila manager daemon
Tool Chain for Linux/Windows
GCC	C/C++ PC cross compiler
GLIBC	POSIX Library
To use the tool chain for Windows, users have to install Cygwin first, and Invoke the cross-compiler in the Cygwin console. Cygwin package 1.5.19-x is already included in the CD.
Standard Device Drivers
	SD/MMC, UART, Ethernet, GPIO, Buzzer
Real Time Clock	supports Ricoh RS5C372
EEPROM	supports ATMEL AT24C16 and compatibles
Pre-load USB Host Drivers (could be customized)
	Flash thumb disk
	IEEE-802.11b/g WiFi adapter (Ralink)
	10/100Mbps Fast Ethernet adapter (RT8150)
	RS-232 adapter (prolific)
	ADSL modem
	ISDN modem (CDC/ACM compatible)
M-501-16 Starter Kit

NPE-9100R-GPRS

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...

Product features

NPE-9100R-GPRS

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
GSM Modem		GPRS
Wireless communication		Zigbee GSM Modem
Module type		I/O module Relay module Telemetry module Industrial modem
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out Relay output

NPE-9100-GPRS

Built-in USB interface, built in GSM/GPRS modem,, Industrial computer, Linux ARM...

Product features

NPE-9100-GPRS

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
Wireless communication
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
GSM Modem		GPRS
Wireless communication		Zigbee GSM Modem
Module type		I/O module Telemetry module Industrial modem
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out

ATC-2000M

TCP/IP to RS-232 embedded converter module, CPU 100MHz, 100base-TX, windows, lin...

Product features

ATC-2000M

Converter
Embedded module
Converters
Compatible OS		Linux Windows
Interfaces		Ethernet
Device features		Programmable Simple device Embedded
Device type		Embedded
Serial ports		RS-232
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Simple device Programmable converter
Switch features		Non-fiber

NPE-9100-EDGE

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...

Product features

NPE-9100-EDGE

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
Wireless communication
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
GSM Modem		GPRS
Wireless communication		Zigbee GSM Modem
Module type		I/O module Telemetry module
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out

NPE-9100R-EDGE

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...

Product features

NPE-9100R-EDGE

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
GSM Modem		GPRS
Wireless communication		Zigbee GSM Modem
Module type		I/O module Relay module Telemetry module
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out Relay output

iPAC-5010

Industrial Programmable Automation Controller Board with 16x isolated DI and 8x ...

Product features

iPAC-5010

Industrial computers
Embedded module
Compatible OS		Linux
Processor type		ARM9
Module type		I/O module
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
I/O		Digital in Digital out Isolated input
Embedded module type		Extension board
Converter type		Programmable converter

M-508

Linux-ready ATMEL AT91RM9200 180MHz Single Board Computer, ARM9, 64MB SDRAM, 10/...

Product features

M-508

Industrial computers
Embedded module
Compatible OS		Linux
Processor type		ARM9
Storage		SD/MMC
Interfaces		Ethernet
Module type		I/O module
Device features		Programmable Embedded
Device type		Embedded Single board
Serial ports		TTY
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Embedded module type		Single-board Computer
Converter type		Programmable converter

NPE-9100

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...

Product features

NPE-9100

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
Wireless communication		Zigbee
Module type		I/O module Telemetry module
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out

NPE-9100R

Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...

Product features

NPE-9100R

Converter
Industrial computers
Computer, PLC
Industrial module
Industrial Ethernet Devices
ZigBee type
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC Flash
Wireless communication		Zigbee
Module type		I/O module Relay module Telemetry module
Ethernet device type		Router Device server
Device features		Programmable Modbus WWW Panel SNMP Device server SNMP
Device type		BOX Computer NPE
Serial ports		RS-232 RS-485 RS-232 x2
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
Converter type		Device server Programmable converter
Other		Fanless
I/O		Digital in Digital out Relay output

EX-9486-2L-8

Linux Small Size industrial computer, ATMEL 180MHz, 32MB SDRAM, embedded module...

Product features

EX-9486-2L-8

Industrial computers
Computer, PLC
Embedded module
Compatible OS		Linux
Processor type		ARM9
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Converter type		Programmable converter

ICOP-6076

PC-104 Embedded Vortex86 200MHz SoC CPU module with VGA, 128MB RAM, RTL8100B 10/...

Product features

ICOP-6076

Industrial computers
Embedded module
ZigBee type
Other		Audio
Interfaces		Ethernet
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Expansions		PC-104
Processor type		Vortex
Switch features		Non-fiber
Embedded module type		CPU module
Format		PC/104
Converter type		Programmable converter

ICOP-6075-L2

PC-104 Embedded Vortex86 166MHz SoC CPU module with Passive Cooler, CRT/LCD VGA,...

Product features

ICOP-6075-L2

Industrial computers
Embedded module
ZigBee type
Interfaces		USB Ethernet
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Expansions		PC-104
Processor type		Vortex
Other		Display
Switch features		Non-fiber
Embedded module type		CPU module
Format		PC/104
Converter type		Programmable converter
USB ports		USB x2 USB x3

ICOP-6076-L2

PC-104 Embedded Vortex86 200MHz SoC CPU module with VGA, 128MB RAM, 2xRTL8100B 1...

Product features

ICOP-6076-L2

Industrial computers
Embedded module
ZigBee type
Interfaces		Ethernet
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Expansions		PC-104
Processor type		Vortex
Switch features		Non-fiber
Embedded module type		CPU module
Format		PC/104
Converter type		Programmable converter

ICOP-6075

PC-104 Embedded Vortex86 166MHz SoC CPU module with CRT/LCD VGA, RTL8100B 10/100...

Product features

ICOP-6075

Industrial computers
Embedded module
ZigBee type
Interfaces		USB Ethernet
Other		Audio Display
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Expansions		PC-104
Processor type		Vortex
Switch features		Non-fiber
Embedded module type		CPU module
Format		PC/104
Converter type		Programmable converter
Graphics interfaces		TV-OUT
USB ports		USB x2 USB x3

PAC-5070

Industrial Programmable Automation Controller with 4x 16-bit A/D input, 8x 2500V...

Product features

PAC-5070

Industrial computers
Computer, PLC
Embedded module
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB Ethernet
Storage		SD/MMC
Module type		I/O module
Device features		Programmable Embedded
Device type		Embedded
Serial ports		RS-232 RS-485
Processor speed		Up to 500MHz
Network interfaces		10/100 TX
I/O		Analog in Digital in Digital out Isolated input
Embedded module type		CPU module
Converter type		Programmable converter

M-502

Linux-ready ARM9 System-On-Module, CPU ARM9 400 MHz, 64 MB SDRAM, Ethernet, USB,...

Product features

M-502

Industrial computers
Embedded module
Compatible OS		Linux
Processor type		ARM9
Interfaces		USB GPIO Ethernet
Storage		SD/MMC
Device features		Programmable Embedded
Device type		Embedded
Processor speed		Up to 500MHz
Switch features		Non-fiber
I/O		Digital in Digital out
Converter type		Programmable converter

M-501 System-On-Module

Embedded(12)

M-501 System-On-Module