M-501T

Przystosowany do pracy w szerokim zakresie temperatur od -20C do +80C.

M-501T Schemat blokowy

Cechy charakterystyczne

ATMEL AT91RM9200 CPU, 200MIPS @180MHz, z MMU. 64MB pamięci SDRAM, 16MB pamięci NOR FLASH 1 port 10/100 Mbps Ethernet z wbudowanym PHY 2 porty USB 2.0 transfer do 12 Mbps obsługa kart SD kontrola przepływu UART mały rozmiar, 80x50mm bardzo małe zużycie energii < 2.5W system Linux 2.6.x OS is pre-built w pamięci FLASH, supports file system dołączone narzędzie GNU C/C++

Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.

Specification
Hardware Specifications
CPU/Memory
CPU	ATMEL 180MHz AT91RM9200 (ARM9, w/MMU)
Memory	64MB SDRAM, 16MB Flash
Network Interface
Type	Ethernet, 10/100 Mbps
PHY	DAVCOM DM9161
Isolation	1.5 KV
USB
Host	x2, USB 2.0 compliant
Signals	UdataA+, UdataA-,UdataB+,UdataB-
UART
Port0	TXD0, RXD0, RTS0, CTS0, GND
Port1	TXD1, RXD1, RTS1, CTS1, DCD1, DTR1, DSR1,GND
Port2	TXD2, RXD2, RTS2, CTS2,GND
Port3	TXD3, RXD3, RTS3, CTS3,GND
Signal Level	CMOS/3.3V compatible
Common UART Parameters
Baud Rate	Up to 921.6 Kbps
Data Bits	5 to 8 bits
Parity	None, Even, Odd, Mark, Space
Stop	1, 1.5, 2 bits
Flow Control	RTS/CTS, XON/XOFF, None
UART Port 0 advanced feature, (when Port0 used as RS-485)
	Supports 9-bit Multi-drop mode
	Supports hardware auto direction control
I2C (Inter-IC Bus)
Signals	TWD, TWDK
Supported devices	(driver has been built-in) Real-time Clock: Ricoh RS5C372 EEPROM: ATMEL AT24C16 and compatibles
I2S (Inter-IC Sound)
Transmitter	TSCK, TWS, TSD
Receiver	RSCK, RWS, RSD
SPI (Serial Peripheral Interface)
Signals	MISO, MOSI, SPCK, CS1, CS2
SD (Secure Digital Card Interface)
Signals	MCCDA, MCCK, MCDA0~MCDA3
Compatible with SD memory card Specification 1.0
Watchdog timer
	CPU built-in internal watchdog timer, used by Linux kernel
General-Purpose IOs (GPIO)
	32 GPIOs, can be programmed as digital input or output
	Support interrupt function when GPIO set as digital input
Signal Level	CMOS/3.3V Compatible
Pre-defined Pins
	Reset Button (CN2, pin#35), input
	Buzzer (CN2, pin#37), output
	2-pin DIP SW (CN2, pin#12,13), input
	System ready LED (CN2, pin#38), output
	LAN activity LED (CN3, pin#11), output
Undefined Digital IO Pins (reserved)
CN1	pin#23, #24, #25, #26
CN3	pin#23, #24
Debug ports
JTAG port	for low level debug
Console port	Tx/Rx serial console (share RTS2, CTS2)
Local Bus
Data bus	8-bit (D0~D7)
Address bus	8-bit (A0~A7)
Chip select	x4 (NCS3~NCS6)
Control bus	RD, WR
Signal Level	CMOS/3.3V Compatible
Power Consumption
Input range	3.0 to 3.6VDC (3.3V nominal)
Consumption	2W
Mechanism
Board dimension	50 x80mm
Mounting holes	x4, 2.0mm(M2) diameter
	CN1: 28 pins; CN2: 50 pins; CN3: 50 pins
	Connectors (2.0mm pitch)
Software Specification
General
OS	Linux kernel 2.6.X
Boot Loader	U-Boot 1.1.2
File systems	JFFS2, EXT2/EXT3, VFAT/FAT, NFS
Protocol Stacks
	support IPV4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V3,SSL, SSH 1/2
Pre-load Utilities
Bash	Shell Command
Telnet	Telnet client program
Busybox	Linux utility collection
FTP	FTP client program
Pre-load Daemons
pppd	Dial In/out over serial port and PPPoE
snmpd	SNMP agent program
telnetd	Telnet server program
inetd	TCP server program
ftpd	FTP server program
boa	Web server program
sshd	secured shell server
iptables	Firewall service manager
armd	Artila manager daemon
Tool Chain for Linux/Windows
GCC	C/C++ PC cross compiler
GLIBC	POSIX Library
To use the tool chain for Windows, users have to install Cygwin first, and Invoke the cross-compiler in the Cygwin console. Cygwin package 1.5.19-x is already included in the CD.
Standard Device Drivers
	SD/MMC, UART, Ethernet, GPIO, Buzzer
Real Time Clock	supports Ricoh RS5C372
EEPROM	supports ATMEL AT24C16 and compatibles
Pre-load USB Host Drivers (could be customized)
	Flash thumb disk
	IEEE-802.11b/g WiFi adapter (Ralink)
	10/100Mbps Fast Ethernet adapter (RT8150)
	RS-232 adapter (prolific)
	ADSL modem
	ISDN modem (CDC/ACM compatible)
M-501-16 Starter Kit
Working temparature	-20C+80C

Cechy produktu:
Komputery przemysłowe
Moduł przemysłowy
Producent	Artila
Kompatybilny system	Linux Windows
Typ procesora	ARM9
Interfejsy	USB GPIO Ethernet
Dysk	SD/MMC
Cechy urządzenia	Programowalny
Szybkość procesora	Do 500MHz
Interfejsy sieciowe	10/100 TX
Inne	Szeroki zakres temperatur
Rodzaj switcha	Nieświatłowodowe
I/O	Wejścia cyfrowe Wyjścia cyfrowe
Typ konwertera	Konwerter programowalny
Porty USB	USB x2