ET-7219Z/S2

The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7019Z/PET-7019Z/ET-7219Z/PET-7219Z is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.

The ET-7018Z/S is a 16-bit, 10-channel differential analog inputs and 6-channel digital ouputs module that provides programmable input range on all analog channels(+/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V, +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA and thermpocouples) and digital output can be set alarm output. Each analog channel is allowed to configure an individual range and has 240 VAC high over voltage protection.

System Specification
Software
Built-in Web Server	Yes
Web HMI	Yes
I/O Pair Connection	Yes
Communication
Ethernet Port	2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE	-
Protocol	Modbus TCP, Modbus UDP
Security	ID, Password and IP Filter
Dual Watchdog	Yes, Module (0.8 seconds), Communication (Programmable)
LED Indicators
for System Running	Yes
for Ethernet Link/Act	Yes
for DI/DO status	Yes
for PoE Power	-
2-Way Isolation
Ethernet	1500 VDC
I/O	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4)	±2 kV for Power Line
Surge (IEC 61000-4-5)	±2 kV for Power Line
Power
Reverse Polarity Protection	Yes
Powered from Terminal Block	12 ~ 48 VDC
Powered from PoE	-
Consumption	3.4 W (Max.)
Mechanical
Dimensions (L x W x H)	120 mm x 76 mm x 38 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 ~ +75°C
Storage Temperature	-30 ~ +80°C
Humidity	10 ~ 90% RH, Non-condensing
I/O specification
Thermocouple Input
Channels	10 (Differential)
Sensor Type	+/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV, +/-1 V, +/-2.5 V, +/-5 V, +/-10 V
	+/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
	Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710)
Individual ChannelConfi guration	Yes
Resolution	16-bit
Sampling Rate	10 Samples/Second (Total)
Accuracy	+/-0.1% of FSR or better
Zero Drift	+/-0.5 μV/°C
Span Drift	+/-25 ppm/°C
Over Voltage Protection	240 Vrms
Input Impedance	>300 kΩ
Common Mode Rejection	86 dB Min.
Normal Mode Rejection	100 dB
Temperature Output Consistency	Yes
Stable Temperature Output in the Field	Yes
Open Wire Detection	Yes
Virtual Channel to Channel Isolation	+/-400 VDC
Digital Output
Channels	3
Type	Isolated Open Collector
Sink/Source (NPN/PNP)	Sink
Max. Load Current	650 mA/Channel
Load Voltage	5 VDC ~ 50 VDC
Overvoltage Protection	60 VDC
Overload Protection	1.4 A
Short-circuit Protection	Yes
Power-on Value	Yes, Programmable
Safe Value	Yes, Programmable

Product features:
Manufacturer	ICPDAS
Interfaces	Ethernet Thermocouple
Module type	I/O module
Device features	WWW Panel
Network interfaces	10/100 TX
Switch features	Non-fiber
I/O	Analog in
Embedded module type	Extension board