WISE-7119

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

WISE-7119 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7119 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

This multi-function module WISE-7119 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240 Vrms high over voltage protection.

Features:

Built-in Web Server for IF-THEN-ELSE rule setting Built-in IF-THEN-ELSE rule enigne for logic operation No more programming. Just click and get done! Support IO, Counter, Timer, Email operations Modbus/TCP Protocol for SCADA Software Seamless Integration IEEE 802.3af-compliant Power over Ethernet (PoE) 10/100 Base-TX Ethernet Support Current Input, Voltage Input and Thermocouple Input Over Voltage Protection is up to 240 Vrms 4-channel Digital Outputs 2-way Isolation/ESD Protection

Product specification
Analog Input
Input Channels	8 (Differential)
Input Type(jumper selectable)	+/-15 mV, +/-50 mV, +/-100 mV, +/-50 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V Thermocouple (J, K, T, E, R, S, B, N, C, L, M,LDIN43710) +/-20mA, 0~20mA, 4~20mA
Resolution	16-bit
Sampling Rate	10 samples/Sec. total
Accuracy	+/-0.1% or better
Zero Drift	+/-10 V/C
Span Drift	+/-25 ppm/C
Input Impedance	Voltage more than 1 M Current 125 Common Mode Rejection 86 dB Min.
Normal Mode Rejection	100 dB
Over Voltage Protection	240 Vrms
Individual Channel Configuration	Yes
Open Wire Detection	Yes
Digital Output
Output Channels	4
Output Type	Isolated Open Collector (Sink)
Max. Load Current	700 mA/Channel
Load Voltage	5 VDC ~ 50 VDC
Overvoltage Protection	60 VDC
Overload Protection	1.4 A
Short-circuit Protection	Yes
System
CPU	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
EEPROM	16 KB
Watchdog	Yes
Communication
PoE Ethernet Port	10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2 Way Isolation
I/O	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4)	+/-4 kV for Power
LED Indicators
PoE	PoE On
L1	System Running
L2	Ethernet Link/Act
L3	Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection	Yes
Powered from terminal block	Yes, 12 ~ 48 VDC
Powered from PoE	Yes, IEEE 802.3af, Class1
Consumption	3.4 W
Mechanical
Dimensions(W x L x H )	123 mm x 72 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Operating Temperature	-25C ~ +75 C
Storage Temperature	-30C ~ +80 C
Relative Humidity	10 ~ 90% RH, non-condensing

Product features:
Computer, PLC
Industrial module
Converters
ZigBee type
Manufacturer	ICPDAS
Interfaces	Ethernet
Module type	I/O module
Device features	WWW Panel
Processor speed	Up to 500MHz
Other	Wide temperature
Switch features	Non-fiber
I/O	Analog in Isolated input
Processor type	80186