Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.
Features
Microprocessor inside with 20MHz
CAN interface connector: D-Sub 9-pin
82C250 CAN transceiver
Built-in CAN/RS-232 Converter firmware
Max transmission speed up to 1M bps for CAN and 115.2K bps for RS-232
Software configurable CAN and RS-232 communication parameters
Max transmission distance over 1000m (follow CAN specification)
Support both CAN 2.0A and CAN 2.0B
Build-in jumper to select 120 ohm terminal resister
Mount easily on DIN-rail
Power, data flow and error indicator for CAN and RS-232
Watchdog inside
Support transparent communication mode
Provide a group of RS-232 devices a method to be the network system (duplex communication mode of RS-232 devices is not supported)
Applications
Control System
Building Automation
Factory Automation
Distributed data acquisition
I-7530 Software Utility Features
CAN bus Baud rate configuration
CAN acceptance filter configuration
CAN 2.0A or 2.0B specific selection
RS-232 Baud rate and data bit setting
RS-232 responded selection
Easy test to transmit/receive can messages
Setting for I-7530 communication mode (normal mode or pair connection mode)
Hardware Specifications
RS-232 interface connector: D-Sub 9-pin
CAN interface connector: D-Sub 9-pin
Isolation voltage: 3000Vrms on the CAN side
Repeater request: over than 1000m (suggestion)
Accessories: One D-Sub 9-pin cable
Dimensions: 123mm x 72mm x 33mm
Power requirement: Unregulated 10~30 Vdc with protection from power reversals
Power consumption: 1W
Operating temperature: -25℃ to +75℃
Storage temperature: -40℃ to +80℃
Communication speed: 115.2K bps max for RS-232 1M bps max for CAN
Product specification
Hardware
EEPROM
2 KB (for system information), 100,000 erase/write cycles