produkt dostępny
tPET-P2A2
Moduł Ethernet z 2 cyfrowymi wejściami oraz 2 cyfrowymi wyjściami (PNP, Source), PoE, izolacja do 3750 Vrms, zapezbieczenie przeciwprzepięciowe do 70VDC, montaż na szynie DIN, 100Base-TX, 1x RJ-45, Modbus TCP Slave, liczniki
ICPDAS
Moduł Ethernet z 2 cyfrowymi wejściami, 2 cyfrowymi wyjściami (PNP, Source) oraz wyjściami PWM. Jest wyposażony w izolację do 3750 Vrms, zabezpieczenie przeciwprzepięciowe do 70VDC oraz technologię PoE (Power over Ethernet). Urządzenie pracuje jako Modbus TCP Slave. Możliwość montażu na szynie DIN.
Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.
Features:
Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
Contains a 32-bit MCU that efficiently handles network traffic
10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, Auto MDI/MDIX, LED
Indicator)
Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC
input
Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
Supports UDP responder for device discovery
Supports web configuration and firmware update via Ethernet
Isolated digital input and output
Supports latched DI and 32-bit high-speed counter functions
Supports I/O pair-connection through the Ethernet
Dual-watchdog with power-on and safe value
Tiny form-factor with easy DIN-Rail mounting
RoHS compliant, no Halogen
Made from fire-retardant materials (UL94-V0 Level)
Low power consumption (about 1.7 W only)
Product specification
System
CPU
32-bit MCU
Dual Watchdog
Yes
Communication
Ethernet Port
10/100 Base-TX,
8-Pin RJ-45 x1, (Auto-negotiating, Auto-MDI/MDIX, LED indicator)
PoE (IEEE 802.3af, Class 1)
LED Display
S1
PoE indicator (Green)
System
indicator (Red)
E1
Link/Act
indicator (Green)
10/100 M
indicator (Yellow)
Mechanical
Dimensions
52 mm x 27 mm x 98 mm
Installation
DIN-Rail
mounting
Environment
Operating Temperature
-25°C ~ +75°C
Storage Temperature
-30°C ~ +80°C
Humidity
10 ~ 90 % RH, non-condensing
Power Requirements
Power Input
PoE: IEEE
802.3af, Class 1
Terminal block: +12 ~ 48 VDC (non-regulated)
Power
Consumption
-
I/O Specifications
Digital Input
Input Channels
2
Input Type (Device)
Wet Contact
(Sink, Source)
On Voltage Level
+10 VDC
~ +50 VDC
Off Voltage Level
+4 VDC
max.
Input Impedance
10 k Ohm
Counters
Max. Count:
4,294,967,285 (32 bits)
Max. Input
Frequency: 3.5 kHz (without filter)
Min. Pulse
Width: 0.15 ms
Frequency Measurement
1 ~ 3.5 kHz in
Mode "1000 ms", (+/- 1 Hz error) 10 ~ 3.5 kHz in Mode "100 ms", (+/-
10 Hz error) 0.01 ~ 1 Hz in Mode "Single-pulse", (+/- 0.01 Hz error)
Overvoltage Protection
+70 VDC
Isolation
3750 Vrms
Digital Output
Output Channels
2
Output Type (Module)
Source, Open Collector
(PNP)
Output Voltage
+10 VDC
~ +40 VDC
Max. Load Current
650 mA/channel at 25 °C
Over-Voltage
+48 VDC
PWM
100Hz max
The unit of duty cycle is 1 ms, and the resolution is about 5
ms.(5~65535 ms)
Short Circuit Protection
Yes
Output Isolation
3750 Vrms