VP-2117

Tabelka poniżej prezentuje parametry techniczne urządzenia. W przypadku, gdyby prezentowane w niej informacje były niekompletne lub budziły wątpliwości prosimy o kontakt mailem bądź telefonicznie z naszym działem technicznym. Dodatkowo służymy pomocą w doborze właściwego urządzenia tak, aby optymalnie spełniało wymagania Państwa projektu.

Product specification
System Software
OS	MiniOS7
Development Software
ISaGRAF Software	ISaGRAF Version 3 : IEC 61131-3 standard. Languages: LD, ST, FBD, SFC, IL and FC
Max. Code Size	Accepts max. 64 KB ISaGRAF code size (Appli.x8m must be more than 64 KB)
Power Supply
Input Range	+10 ~ +30 VDC
Isolated	1 kV
Capacity	3 A, 5 V supply to I/O expansion slots
Power Consumption	6 W (0.25 A @ 24 VDC)
General Environment
Temperature	Operating: -15 ~ +55 C, Storage : -30 ~ +80 C
Humidity	10 ~ 90 % RH (non-condensing)
System
CPU	80186 (80 MHz and 16-bit) or compatible
Watchdog Timers	Yes (0.8 second)
RTC (Real Time Clock)	Provide second, minute, hour, date, day of week, month, year
SRAM	768 KB
Dual Battery Backup SRAM	512 KB (for 5 years data retention while power off)
FLASH	512 KB (100,000 erase/write cycles)
FLASH Disk	64 MB NAND Flash (100,000 erase/write cycles)
NVRAM	31 bytes (battery backup, data valid up to 5 year)
EEPROM	16 KB, Data retention: 40 years. 1,000,000 erase/write cycles
Serial Number	Yes,64-bit hardware unique serial number
Communication Interface
Ethernet	RJ-45*1, 10/100 Base-TX, (Auto-negotiating, LED indicators), program download port.
COM0	Internal communication with the I-87K High Profile modules in slot 0 ~ 2
COM1	RS-232: TxD, RxD, GND, Speed: 115200 bps max. Program downloads port.
COM2	RS-485 (D+, D- ) Speed: 115200 bps max. 2500 VDC isolated
COM3	RS-232/RS-485 RS-232:TxD,RxD,GND,CTS,RTS RS-485: DATA+,DATA-, Speed: 115200 bps max. Program downloads port.
I/O Expansion Slots
Slot Number	VP-2117: 3 slots (slot 0 ~ slot 2)
	* Accept only High Profile I-8K Parallel and High Profile I-87K Serial I/O boards
Hot Swap	* For High Profile I-87K I/O modules in slot 0 ~ 2 only
Data Bus	8/16 Bits
Address Bus Range	2 K for each slot
MMI (Man Machine Interface)
LCD Type and Size	STN, 128x64 Dot Matrix LCD
Text Font	English + Simplified Chinese
Display Mode	Text + Graphics
Rubber Keypad	24 keys
Buzzer	Yes
LED Indicators	3 Dual-Color LEDs (PWR, RUN, LAN1, L1, L2, L3 L1 ~ L3 for User Programmable)
Mechanical
Dimensions (W x L x H)	182 mm x 158 mm x 125 mm
Ingress Protection	Front panel: IP65
Motion
Motion Control	one I-8091W (2-axis) or two I-8091W (4-axis) to do motion control. Ethernet communication is also available when doing motion control.
PWM Output
High Speed PWM Module	I-8088W: 8-ch PWM outputs, software support 1 Hz ~ 100 KHz (non-continuous), duty: 0.1 ~ 99.9%
DO Module as PWM	8-ch. max. 500 Hz max. For Off=2 and On=2 ms . Output square wave: Off: 2 ~ 32766 ms, On: 2 ~ 32766 ms. Optional DO Boards: I-8037W, 8041W, 8041AW, 8042W, 8050W, 8054W, 8055W, 8056W, 8057W, 8060W, 8063W, 8064W, 8068W, 8069W. (Relay Output boards cannot generate fast square wave)
Counter, Encoder, Frequency
Parallel DI Counter	8-ch. max. For 1 controller. Counter val: 32-bit. 500 Hz max. Min. ON and OFF width must 2 ms. Optional DI boards: I-8040W, 8040PW, 8042W, 8046W, 8048W, 8050W, 8051W, 8052W, 8053W, 8053PW, 8054W, 8055W, 8058W, 8063W.
Serial DI Counter	Counter input: 100 Hz max. Counter value: 0 ~ 65535 (16-bit) Optional serial I-87K DI boards: I-87040W, 87046W, 87051W, 87052W, 87053W, 87053W-A5, 87054W, 87055W, 87058W, 87059W, 87063W.
Remote DI Counter	All remote I-7000 and I-87K DI modules support counters. 100 Hz max. value: 0 ~ 65535
High Speed Counter	I-87082W: 100 kHz max. 32 bit I-8084W: 250 kHz max. 32 bit
Encoder	I-8093W: 3-axis Encoder Module, max. 1M Hz for quadrant input mode, max. 4M Hz for pulse/direction and cw/ccw input mode. (FAQ-112) I-8084W: 250 kHz max., 4-ch encoder, can be pulse/direction, or Up/Down or A/B phase (Quad. mode) Not support Encoder Z-index. (FAQ-100)
Frequency	I-87082W: 2-ch, 1 Hz ~ 100 kHz I-8084W: 8-ch, 1 Hz ~ 250 kHz
Protocols
Modbus RTU/ASCII Master Protocol	Up to 2 COM Ports (COM1 ~ 3 and COM5 if multi-serial port boards are plugged in)can support Modbus RTU Master or ASCII Master protocol to connect to other Modbus Slave devices, 2 ports support up to 128 Modbus_xxx function blocks (same type).
Modbus RTU Slave Protocol	Up to 2 COM Ports, COM1 and one of (COM2, COM3) can support Modbus RTU Slave protocol for connecting ISaGRAF, PC/HMI/OPC Server and MMI panels.
Modbus TCP/IP Slave Protocol	Support Modbus TCP/IP Slave protocol for connecting ISaGRAF and PC/HMI. (Max. 6 connections)
Remote I/O	One of COM2, 3 supports I-7000 I/O modules and (I-87K base or RU-87P1/2/4/8) + I-87K High Profile I/O cards as Remote I/O. Max. 64 Remote I/O module for one controller
Fbus	Built-in COM3 Port to exchange data between ICP DAS's ISaGRAF PACs.
Ebus	To exchange data between ICP DAS's ISaGRAF Ethernet PACs via Ethernet port.
SMS: Short Message Service	One of COM3 or (COM5 in multi serial port board) can link to a GSM modem to support SMS. User can request data/control the controller by cellular phone. The controller can also send data and alarms to user's cellular phone. Optional GSM/GPRS modem: GTM-201-RS232 (850/900/1800/1900 GSM/GPRS External Modem) or visit to http://www.icpdas.com/products/GSM_GPRS/wireless/GSM_GPRS_modem.htm for recommended GSM/GPRS modem.
User-defined Protocol	User can write his own protocol applied at COM1 ~ COM3 ( and COM5 ~ COM16 if multi-serial port boards are plugged) by serial communication function blocks.
CAN/CANopen	Up to 3 COM Port. User can use its COM1, 3, or (COM5 ~ COM12, resides at the I-8112iW/8114W/ 8114iW RS-232 expansion board) to connect one I-7530 (RS-232 to CAN converter) to support CAN/CANopen devices and sensors. One VP-2117 supports max. 3 RS-232 Ports to connect max. 3 I-7530. Please refer to www.icpdas.com FAQ Software ISaGRAF Ver.3 (English) FAQ-086.
FRnet I/O	Support Max. 3 I-8172W FRnet Master cards to connect FRnet I/O modules. (Max. 768-ch. DI + 768-ch. DO)
Sending E-mail	Actively or passively sending E-mail via Ethernet port through internet. Max.10 receivers for each sending and can send E-mail with an attached file. (Max. file size is about 488 KB)

Cechy produktu:
Konwerter
Komputer, Sterownik PLC
Konwertery
Producent	ICPDAS
Dysk	Flash
Interfejsy	Ethernet
Typ modułu	Moduł I/O
Typ panelu	Panel PC
Cechy urządzenia	Programowalny
Porty szeregowe	RS-232 RS-485
Szybkość procesora	Do 500MHz
Interfejsy sieciowe	10/100 TX
Inne	Szeroki zakres temperatur Drabinka PLC
Inne	Wyświetlacz
Rodzaj switcha	Nieświatłowodowe
Cechy urządzenia	Wyświetlacz
Typ procesora	80186
Rozmiar ekranu	Do 5"
Rozmiar ekranu	do 5"
Typ konwertera	Konwerter programowalny