NPE M1000

Converter
Computer, PLC
Industrial module
Compatible OS
Processor type
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Network interfaces
Switch features
I/O
Device type
Converter type
GPS
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway

NPE M1000

NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
TECHBASE
Product configuration Collapse
RAM and eMMC amount: 1GB RAM / 16GB eMMC Expand
PCI-e Expansion: none Expand
Second PCI-e Expansion: none Expand
1st Expansion Card: none Expand
2nd Expansion Card: none Expand
3rd Expansion Card: none Expand

 

NPE M1000 - Programmable automation controller

 

NPE M1000 is a series of x86 industrial computers which you can easily adapt to your needs by choosing from the available options. Upgraded NPE M1000 industrial computer series is powered by Quad-core Intel Atom x5 Z8350 1.44GHz (up 1.92GHz) processor, eqiupped with up to 4GB DDR3 RAM, up to 64GB eMMC on-board and Gigabit Ethernet for high performance. NPE features industrial protocol support, e.g. Modbus, M-Bus, SNMP, MQTT and more.

 

ico-sup

 

 

Ready-to-use programmable automation controller

 

 

ico-rasp

The NPE M1000 platform has a variety of functionalities and is easy to configure at the same time – it combines ease of use, characteristic of simple devices with the possibilities of embedded computers.

ico-perf

State of the art performance reached with Quad-Core Intel Atom x5 Z8350 1,44GHz fanless processor, allows using NPE M1000 device for specific application, like remote monitorng, data logging, protocol converting or SmartGrid remote control

iModCloud Ecosystem 

 

Hardware resources

Base version

  • Quad-Core Intel Atom x5 Z8350 1,44GHZ (up 1,92GHz) processor
  • 1/2/4 GB DDR3L RAM, 16/32/64 GB eMMC FLASH
  • Rich set of I/O interfaces: 4x Digital Input, 4x Digital Output
  • Economic 1-Wire bus, typically used for reading temperature and humidity sensors

Hardware Add-on Options

  • 1x RS-232/485
  • 4x Configurable Digital I/Os
  • 1x Gigabit Ethernet
  • 4x USB 2.0, 2x USB 3.0 (OTG)
  • PCI-Express
  • HDMI1.4b
  • ABS casing, DIN horizonal rail mounting

Internal expansion cards

  • GPRS/3G/4G/LTE Adavanced/5G
  • NarrowBand IoT
  • GPS
  • WiFi
  • Bluetooth
  • ZigBee
  • Lora
  • ExCard extension modules

 

NPE M1000 can perform the following functions:

Data logger

 NPE M1000 telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial port

  • Gigabit Ethernet
  • Wireless LTE/3G/GPRS/EDGE transmission
  • USB 3.0
  • ZigBee
  • etc.

Protocol and Interface Converter

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus TCP
  • Modbus RTU
  • M-Bus
  • SNMP
  • MQTT
  • 1-Wire

In addition, due to the possibilities of the Linux operating system, each user can create their own protocols with the use of the available SDK.

Embedded Computer

The design of the NPE M1000 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The  Linux system provides stable operation of the device.

Telemetry module

NPE M1000 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

NPE M1000 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.

PLC

NPE M1000 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.

Due to the Linux operating system - NPE M1000 is a stable central unit of an automation system.

Industrial modem and LTE/3G/GPRS router

With a built-in GSM modem, NPE M1000 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.

You can build a VPN with NPE M1000. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.

3G technology provides higher speed and lower latency at packet data transmission.

I/O Expansion Module

Due to digital I/O and analog inputs, NPE M1000 can successfully replace expansion modules.

The NPE M1000 device allows:

  • visualisation at the monitoring point
  • remote control via a Web browser
  • transfer values via any user protocol (e.g. Modbus, SNMP).

LTE / 3G / GPRS / GSM Notify module

With a built-in GSM modem, the NPE M1000 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification.

GPS

GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.

 

Additional features

    • iMod Platform Support. NPE M1000 can easily work with iMod telemetry modules and in nearest future with iMod M1000.
    • iModCloud EcosystemA combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.

 

iModCloud - Dedicated Cloud Service

iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE M700 devices.

With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.

iModCloud - dedykowany system internetowy

 

Related products Collapse
Negotiate
Product card
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, microSD, Arduino, ESP32, RTC, WatchDog, 2 x RS-232 / 2 x RS-485, 8 x DIO, 4 x AI, 2 x AO, 1 x Ethernet, UPS power supply, GPRS/LTE-NB modem, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee, ExCard modules
Negotiate
Product card
iModCloud Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), 8GB DDR3, 250GB SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, Arduino, ESP32, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DIO, 2 x AI, GPRS/LTE-NB modem options, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee
Negotiate
Product card
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Negotiate
Product card
iMod Software on Mini-PC BOX with quad coreIntel Celeron N2930 1.83GHz (boost do 2.16GHz), up to 8GB DDR3, SSD, mSATA/Mini PCI-e, 3xRS-232, 1xRS-232/422/485, 2x Gigabit LAN, 1x USB 3.0, 5x USB 2.0, HD Audio, DVI-D, VGA, Wi-Fi ready, SIM holder, 12V AC-DC, IoT, iMod, Wi-Fi, Bluetooth, 2xEthernet, modem, GPS, Modbus, MQTT, SNMP
Negotiate
Product card
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 MB RAM, 8 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Similar products
iMod Software on RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), up to 8GB DDR3, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option), box, IoT, iMod, Wi-Fi, Bluetooth, modem, GPS, Modbus, MQTT, SNMP
iMod Software on RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2....
Product features

iModBOX R200

Computer, PLC
Industrial module
Compatible OS
Processor type
Interfaces
Graphics interfaces
Expansions
Storage
Wireless communication
Device features
Device type
Serial ports
Processor speed
Switch features
I/O
Module type
Mount type
GPS
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 2xDO, 2 x relay outputs, built in GSM/GPRS modem,
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, built in GSM/GPRS modem,
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, built in GSM/GPRS/EDGE
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 4xAI
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, built in GSM/GPRS/EDGE, 2xDO, 2 x relay outputs
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 4xAI, built in GSM/GPRS modem,
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 2xDO, 2 x relay outputs
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 4xAI, built in GSM/GPRS/EDGE
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Fanless Embedded System, Intel Atom 1.1GHz, 2x RS232/422/485, 1x 100base-tx, 1x 1000base-t, 2x USB, 2x DIO, CF, SD, 2GB RAM, fanless, wt, din rail
Fanless Embedded System, Intel Atom 1.1GHz, 2x RS232/422/485, 1x 100base-tx, 1x ...
Product features
Fanless Embedded System, Intel Atom 1.33GHz, 2x RS232/422/485, 1x 100base-tx, 1x 1000base-t, 2x USB, 2x DIO, CF, SD, 2GB RAM, fanless, wt, din rail
Fanless Embedded System, Intel Atom 1.33GHz, 2x RS232/422/485, 1x 100base-tx, 1x...
Product features
Fanless Embedded System, Intel Atom 1.1GHz, 1x DIO, 6x RS232/422/485, 1x 100Base-tx, 1x 1000base-tx, 2x USB, 1x VGA, CF, SD, Wifi, 3G, wt, din-rail
Fanless Embedded System, Intel Atom 1.1GHz, 1x DIO, 6x RS232/422/485, 1x 100Base...
Product features
Fanless Embedded System, Intel Atom 1.33GHz, 1x DIO, 6x RS232/422/485, 1x 100Base-tx, 1x 1000base-tx, 2x USB, 1x VGA, CF, SD, Wifi, 3G, wt, din-rail
Fanless Embedded System, Intel Atom 1.33GHz, 1x DIO, 6x RS232/422/485, 1x 100Bas...
Product features
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB DDR3, 250GB SSD, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option)
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB...
Product features

TECHBOX R200

Computer, PLC
Compatible OS
Processor type
Interfaces
Graphics interfaces
Expansions
Storage
Device features
Serial ports
Processor speed
Switch features
I/O
Mount type
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB DDR3, 250GB SSD, 2x 2,5" SATA2, 1x mSATA, 1x Mini PCI-e, 1xRS-232/422/485, 4x Gigabit LAN, 1x USB 3.0, 1x USB 2.0, SIM holder, VGA (option), GPIO (option), dodatkowy COM (option)
RACK 1U computer with Quad-core Intel Celeron N2930 1.83GHz (2.16GHz boost), 8GB...
Product features

iModCloudBOX R200

Computer, PLC
Compatible OS
Processor type
Interfaces
Graphics interfaces
Expansions
Storage
Device features
Serial ports
Processor speed
Switch features
I/O
Mount type