NPE M300

Converter
Computer, PLC
Industrial module
Cloud services
Compatible OS
Interfaces
GSM Modem
Wireless communication
Device features
Serial ports
Processor speed
Network interfaces
Switch features
I/O
Module type
Device type
Converter type
Processor type
GPS
NPE M300 - Industrial computer, IoT Gateway, Quad-core Cortex-A7 1.2 GHz or Cortex-A53 1.5GHz, up to 1GB RAM, 8/16/32 GB eMMC, Linux 4.4+, RTC, WatchDoG, 1 x RS-232, 1 x RS-485, 4 x DIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, microSDHC slot GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway, LoRa, NB-IoT

NPE M300

NPE M300 - Industrial computer, IoT Gateway, Quad-core Cortex-A7 1.2 GHz or Cortex-A53 1.5GHz, up to 1GB RAM, 8/16/32 GB eMMC, Linux 4.4+, RTC, WatchDoG, 1 x RS-232, 1 x RS-485, 4 x DIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, microSDHC slot GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway, LoRa, NB-IoT
TECHBASE
Product configuration Collapse
Core module: Quad-core Cortex-A7 1.2GHz, 512MB RAM, 10/100 Mbps Ethernet Expand
M-Bus support: none Expand
PCI-e Expansion: none Expand
USB Expansion: none Expand
1st Expansion Card: none Expand
2nd Expansion Card: none Expand
3rd Expansion Card: none Expand

 

NPE M300 - Programmable automation controller

 

NPE M300 is a series of industrial computers which you can easily adapt to your needs by choosing from the available options. Upgraded NPE M300 industrial computer series is powered by Quad-core Cortex-A7 1.2GHz or Cortex-A53 1.5GHz processor, eqiupped with 512/1024MB DDR3 RAM, optional 8/16/32GB eMMC on-board and optional Gigabit Ethernet for high performance. NPE features industrial protocol support, e.g. Modbus, M-Bus, SNMP, MQTT and more.

 

ico-sup

 

 

Ready-to-use programmable automation controller

 

 

ico-rasp

The NPE M300 platform has a variety of functionalities and is easy to configure at the same time – it combines ease of use, characteristic of simple devices with the possibilities of embedded computers.

ico-perf

State of the art performance reached with Quad-Core Cortex A7 1.2 GHz or Cortex-A53 1.5 GHz fanless processor, allows using NPE M300 device for specific application, like smartgrid remote control

iModCloud Ecosystem 

 

Hardware resources

Base version

  • Quad-Core Cortex-A7 1.2GHz / Cortex-A53 1.5GHz processor
  • 512/1024MB DDR3 RAM, up to 8/16/32GB NAND FLASH and microSD slot
  • Rich set of I/O interfaces: 2x Digital Input/Output (DIO)
  • Economic 1-Wire bus, typically used for reading temperature and humidity sensors

Hardware Add-on Options

  • 1x RS-232, 1x RS-485
  • 1x 10/100 Mbps Ethernet or 1x Gigabit Ethernet
  • 1x USB 2.0, 2x USB 2.0 pin
  • mBus Master up to 10 devices (optional)
  • PCI-Express
  • ABS casing, DIN horizonal rail mounting

Internal expansion cards

  • GPRS/3G/4G/LTE Adavanced/5G
  • GPS
  • WiFi
  • Bluetooth
  • ZigBee
  • Lora

 

NPE M300 can perform the following functions:

Data logger

 NPE M300 telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial port

  • Gigabit Ethernet
  • Wireless LTE/3G/GPRS/EDGE transmission
  • USB
  • ZigBee
  • etc.

Protocol and Interface Converter

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus TCP

  • Modbus RTU

  • M-Bus

  • SNMP

  • 1-Wire

In addition, due to the possibilities of the Linux operating system, each user can create their own protocols with the use of the available SDK.

Embedded Computer

The design of the NPE M300 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The  Linux system provides stable operation of the device.

Telemetry module

NPE M300 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

NPE M300 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.

PLC

NPE M300 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.

Due to the Linux operating system - NPE M300 is a stable central unit of an automation system.

Industrial modem and LTE/3G/GPRS router

With a built-in GSM modem, NPE M300 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.

You can build a VPN with NPE M300. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.

3G technology provides higher speed and lower latency at packet data transmission.

I/O Expansion Module

Due to digital I/O and analog inputs, NPE M300 can successfully replace expansion modules.

The NPE M300 device allows:

  • visualisation at the monitoring point
  • remote control via a Web browser
  • transfer values via any user protocol (e.g. Modbus, SNMP).

GSM / GPRS / EDGE / 3G Notify module

With a built-in GSM modem, the NPE M300 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification.

GPS

GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.

 

Additional features

    • iMod Platform Support. NPE M300 can easily work with iMod telemetry modules and in nearest future with iMod M300.
    • iModCloud EcosystemA combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.

 

iModCloud - Dedicated Cloud Service

iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE M300 devices.

With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.

iModCloud - dedykowany system internetowy

 

Related products Collapse
Negotiate
Product card
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, microSD, Arduino, ESP32, RTC, WatchDog, 2 x RS-232 / 2 x RS-485, 8 x DIO, 4 x AI, 2 x AO, 1 x Ethernet, UPS power supply, GPRS/LTE-NB modem, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee, ExCard modules
Negotiate
Product card
NPE M1000 - Industrial computer, IoT Gateway, Quad-core Intel Atom x5 Z8350 1.44GHz (up to 1.92GHz), 1/2/4 GB RAM, 16/32/64 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 3.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
Negotiate
Product card
Industrial computer, IoT Gateway, Dual-core Tensilica LX6 240 MHz, 512KB/4MB RAM, 4MB Flash, Arduino, ESP32, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DIO, 2 x AI, GPRS/LTE-NB modem options, Wi-Fi, Bluetooth BLE, LoRa, Sigfox, NarrowBand-IoT, Zigbee
Similar products
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM11 700MHz, 512/1024 MB Ram, 4 GB Flash, Linux 4.4+, RTC, WatchDog, Ethernet, 2 x RS-232 / 2 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, 4 x AI, OneWire, CAN, HDMI, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE X500 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHz or ARM1...
Product features
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/1024 MB Ram, 4096 MB Flash, Linux 4.4+, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x DI/DO(configurable), 4 x AI, 1 x 1-Wire, 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT
Industrial computer NPE 9500, ARM11 700MHz or Quad-core Cortex A53 1.2 GHz, 512/...
Product features
Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 800MHz, 32 I/O, 6xRS-232, 2xRS-485, CAN, 2xEthernet, 1-Wire, USB 2.0, 3 expansion cards, LTE, embedded computer, zigbee, IoT, iMod, Wi-Fi, Bluetooth, GPIO, GPS, Modbus, MQTT, SNMP
Industrial Computer NPE X1000 with iMod software, Telemetry Module, Cortex A8 80...
Product features
Industrial computer NPE X1000, Cortex A53 1.2GHz, Linux, 4x DI, 4x DO, up to 24x Relay, up to 48x AI/AO, up to 76x DIO, up to 10xRS-232/485, CAN, up to 3x Ethernet, 1-Wire, 2x USB, HDMI, 3G/LTE, GPRS, Wi-Fi, GPS, Bluetooth, ZigBee, LoRa, NB-IoT, HDMI, 6x expansion slots, WT, industrial controller, device server, programmable device, fanless, router, LTE, IoT
Industrial computer NPE X1000, Cortex A53 1.2GHz, Linux, 4x DI, 4x DO, up to 24x...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, built in GSM/GPRS modem,, 2xDO, 2 x relay outputs
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, built in GSM/GPRS modem,
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, Built-in USB interface, built in GSM/GPRS/EDGE
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 2xDO, 2 x relay outputs, built in GSM/GPRS/EDGE
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer NPE M500 with iMod software, Telemetry Module, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, embedded box, Winows 10 IoT, CODESYS
Industrial computer NPE M500 with iMod software, Telemetry Module, ARM Cortex-A5...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 4xAI, built in GSM/GPRS modem,
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS485, 8x DI, Ethernet 10/100BaseT, SD/MMC, fanless, SNMP, BOX, Modbus, programmable, device server, router, telemetry module, DO, flash, www, usb, zigbee, 4xAI, built in GSM/GPRS/EDGE
Industrial computer, Linux ARM9 32-bit RISC 180MHz 200MIPS CPU. 2x RS232, 1x RS4...
Product features
Industrial computer NPE M500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, Windows 10 IoT, CODESYS
Industrial computer NPE M500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram,...
Product features
Industrial computer NPE M9500 with iMod software, Telemetry Module, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, embedded box, Windows 10 IoT, CODESYS
Industrial computer NPE M9500 with iMod software, Telemetry Module, ARM Cortex-A...
Product features
Industrial computer NPE M9500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram, 8GB microSDHC, Linux 4.4, RTC, 240 byte SRAM, Watch Dog Timer, 1 x RJ-45 10/100 Mbps, 2 x RS-232(3 pins)/ 2 x RS-485(2 pins) 4 x DI, 4 x DO, 4 x AI (option), 1 x 1-Wire, 1 x CAN (option), 1 x HDMI, 1 x USB 2.0, 1 x SIM CARD slot, LTE, Wi-Fi, Bluetooth, GPS, Zigbee, IoT, Windows 10 IoT, CODESYS
Industrial computer NPE M9500, ARM Cortex-A53, quad-core 1.2GHz (64bit), 1GB Ram...
Product features
NPE X400 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHzz, 1024 MB RAM, 4 GB Flash, Linux 4.4+, RTC, WatchDog, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire, USB 2.0, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE X400 - Industrial IoT Gateway Computer, Quad-core Cortex A53 1.2 GHzz, 1024 ...
Product features
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 MB RAM, 8 GB Flash, Linux 4.4+, RTC, WatchDoG, 1 x RS-232 / 1 x RS-485, 4 x DI, 4 x DO, 4 x DIO/GPIO, OneWire,, USB 2.0, Gigabit Ethernet, SIM CARD slot, GPRS/3G/LTE modem options, Wi-Fi, Bluetooth, GPS, Zigbee, IoT Gateway
NPE M700 - Industrial computer, IoT Gateway, Quad-core Cortex A7 1.2 GHz, 1024 M...
Product features

NPE M700

Converter
Computer, PLC
Industrial module
Compatible OS
Interfaces
Storage
GSM Modem
Wireless communication
Module type
Device features
Serial ports
Processor speed
Network interfaces
Switch features
I/O
Device type
Converter type
Processor type
GPS